WORKSHOP PAPER
1kFPS Time-of-Flight Imaging with a 3D-stacked CMOS SPAD Sensor
Abstract
Current 3D Time-of-Flight (ToF) systems typically offer video frame rates. However, in safety-critical applications, such as automotive LIDAR, faster frame rates, and a reduced latency in 3D perception, would be of considerable benefit. This paper presents initial 3D imaging results from a direct ToF SPAD image sensor, with in-pixel photon processing, that can operate at frame rates exceeding 1kFPS.Keywords
Time-of-Flight, 3D imaging, SPAD sensor,References
1) Henderson, R.K. et al., "A 256×256 40nm/90nm CMOS 3D-Stacked 120dB-Dynamic Range Reconfigurable Time-Resolved SPAD Imager", ISSCC 2019. https://doi.org/10.1109/isscc.2019.8662355
2) Dutton, N.A.W. et al., "A Time-Correlated Single-Photon-Counting Sensor with 14GS/S Histogramming Time-to-Digital Converter", ISSCC 2015. https://doi.org/10.1109/isscc.2015.7062997
3) Bronzi, D. et al., "SPADAS: A High Speed 3D Single-Photon Camera for Advanced Driver Assistance Systems", Proc. SPIE 9366, 2015. https://doi.org/10.1117/12.2075662
4) , "http://www.ti.com/product/OPT8320"
5) Linder, S. et al., "A 252 × 144 SPAD Pixel FLASH LiDAR with 1728 Dual-clock 48.8 ps TDCs, Integrated Histogramming and 14.9-to-1 Compression in 180nm CMOS Technology", VLSI 2018. https://doi.org/10.1109/vlsic.2018.8502386
6) Bamji, C.S. et al., "1Mpixel 65nm BSI 320MHz Demodulated TOF Image Sensor with 3.5µm Global Shutter Pixels and Analog Binning", ISSCC 2018. https://doi.org/10.1109/isscc.2018.8310200
7) Perenzoni, M. et al., "Figures of Merit for Indirect Time-of-Flight 3D Camera: Definition and Experimental Evaluation", Remote Sense. 3 (2011). https://doi.org/10.3390/rs3112461
